2000 lbs capacity

Overview

Maximum part diameters: 50 inches (1270 mm) over drive and 63 inches (1600 mm) over bed. Maximum part distance between support bearing centerlines is 31 inches (787 mm) using one bed; minimum part distances between support bearings centerlines are Outboard: 4 inches (102 mm), Inboard: 9 inches (229 mm), and 1 inch (25.4 mm) with optional fixture. Journal diameters on the standard bearing set range from 1/8 to 15 inches (3.2 to 381 mm). Mass and unbalance limits: Maximum Weight 2,000 lbs. (908 Kg) and Minimum Weight 1 lb. (454 g). Maximum Weight per Support is 1,400 lbs. (636 Kg) with a Maximum Overload per Support of 1,500 lbs. (681 Kg). Instrument readout capability (maximum indicated sensitive per plane) is .0001 ounce-inch and .03 gram-inch; Maximum Achievable unbalance is .0084 ounce-inch total, Residual Unbalance is .0042 ounce-inch/plane under ideal rotor conditions but not to exceed .000005 inches mass center displacement, and Maximum Unbalance reduction per run is 95%. Machine base and power: Machine Base Length is 72 inches (1829 mm), Machine Base Width is 32 inches (813 mm), and Machine Width (including drive) is 50 inches (1270 mm). Shipping Weight is 1200 lbs. (544 Kg) on a pallet and 1550 lbs. (703 Kg) in a crate. Motor & Control features a Variable Frequency AC Drive with programable acceleration/deceleration patterns, DC injection breaking with 0.1 to 240 Hz Output, Rated Horsepower 2 hp at 1800 RPM (1.5 Kw), Speed Range 10 to 4000 RPM, Power Required 200 to 230 Volt, 3 phase 60 Hz or 380 to 460 Volt, 3 phase 50/60 Hz optional, and Recommended Balancing Speed 150 to 4000 RPM. Designed for balancing rotors and parts that fall within the specified dimensional and mass limits, including parts up to 2,000 lbs. (908 Kg) and as light as 1 lb. (454 g). It accommodates parts with up to 50 inches (1270 mm) diameter over the drive or 63 inches (1600 mm) over the bed, journal diameters from 1/8 to 15 inches (3.2 to 381 mm), and span between supports up to 31 inches (787 mm) using one bed. Balancing operations can be performed across the machine's Speed Range of 10 to 4000 RPM with a Recommended Balancing Speed of 150 to 4000 RPM, using the Variable Frequency AC Drive with programable acceleration/deceleration patterns and DC injection breaking (0.1 to 240 Hz Output) to control spin and stopping behavior.